Firing Service
We offer firing services for both members and non-members. Members receive a reduced firing rate, while external work is priced separately. If you’re bringing in pieces made outside the studio, please review the required guidelines and information below before bringing your work to the studio.
General firing fees for studio users
Bisque: bone dry - €10/kg
Bisque: leather hard - €8.50/kg
Glaze: €8.50/kg
Rental of jewellery rack
5€/firing
Plates
Øup to 18cm: 10€/kilo
Ø18-25cm: 5€ flat fee
Ø25cm plus: 10€ flat fee
Firing Service for external work
We accept pieces made outside the studio for firing with no booking required. 
External work is charged at €10/kg.
Before bringing your work, please ensure all of your materials are suitable for:
- Bisque firing: 930°C 
- Glaze firing: 1235°C 
For every material you’ve used, staff must be able to verify product information. Please bring original labels or clear photos of all materials. Unfortunately, we cannot fire any work if the materials or their firing ranges cannot be confirmed.
If you would like to fire pieces at different temperatures you can arrange a private kiln:
Private Kilns
“Lori” aka NABERTHERM 14S - 160€
70cm high, 40cm wide, 50cm deep
“Robyn” aka NABERTHERM N150 - 160€
60cm high, 45cm wide, 50cm deep
“Maddy” aka NABERTHERM Top100 - 120€
56cm high, 48cm wide, 48cm deep
Wondering if your pieces have been fired?
Check @popkilns to find out!
We post photographs of everything that comes out of the kilns, so you can check if your pieces are ready for glazing or pick up!
Firing FAQs
- 
      
        
          
        
      
      Average turnaround is 1-2 weeks; however it heavily depends on the sizes of the pieces and the studio firing schedule. Larger pieces can take longer. 
- 
      
        
      
      It depends on how much work there is on the shelves but we fire on average 2 to 3 bisque kilns and 2 glaze kilns per week. 
- 
      
        
      
      Yes, please contact us at least one month in advance via email at studio@peaceoutparadise.com to discuss specifications and firing requirements. As our members work has a high priority, we will not take any private bookings during December. 
- 
      
        
      
      Yes, please provide pictures of the labels of all materials used when bringing in your work. The studio takes no liability in any case of damage to our kilns or other peoples work. 
- 
      
        
      
      As long as you have previous experience with glazing then we are happy to have people glaze external work in the studio. A single check-in is 25€. Regular firing fee applies. 
- 
      
        
      
      We aim to get everything through our kilns within 2 weeks. This timeline can vary depending on the size of a piece - for instance very small items usually go through very fast, whereas large sculptures will have to wait longer before there is room in one of the kilns. We upload pictures of everything taken out of the kilns on @popkilns instagram, so you can always keep an eye on things from there. 
- 
      
        
      
      Yes, ALL outside materials (clay and glazes) must be compatible with our firing temperatures and be checked by a member of staff before being used. 
- 
      
        
      
      In order to use your own clay in the studio we need to know all details in advance. Once confirmed we can provide a plaster bat, bucket and storage space for your clean up and recycling. We offer this for a period of 2 weeks at a time, after which time the set up needs to be cleared so that other members can use the space. 
 
            
              
            
            
          
               
            
              
            
            
          
               
                 
                 
                 
                 
                 
                 
                